Yishun · Quoted from photos
Marble Etch Repair & Shine Restoration in Yishun
Etch marks are the dull, cloudy rings and spots left when something acidic touches marble: lemon juice, vinegar, soft drinks, sauces, toilet cleaner or the wrong floor cleaner. The acid dissolves a thin layer of the surface. Etching cannot be cleaned off, but it can be honed out and the shine restored.
What's included
- Etch assessment (light etch vs deep etch)
- Light etches: polishing compound to restore gloss
- Deep etches: diamond honing then polishing
- Blending so the area matches the surrounding shine
- Advice on safe cleaning products
Signs you need this
- Dull rings where glasses or bottles stood
- Cloudy patches near the kitchen or bathroom
- Dull trails where cleaner was spilled
- Spots that feel rough compared to the rest of the marble
- Marks that look lighter, not darker
Etch Repair & Shine prices in Yishun
| Service | Price (SGD) |
|---|---|
| Etch mark repair (per spot or area) | Quoted from photos |
| Vanity / table top shine restoration | Quoted from photos |
| Whole-floor shine restoration | from $1/sq ft* |
*Indicative starting rates. Minimum job charge $350 ($250 for sealing only). Final price depends on the marble type, its condition, how much grinding it needs, the area and access. Spot repairs, vanity tops, bathroom walls and regrouting are quoted from photos. No transport charge within Yishun, Canberra and Sembawang. The price we confirm on WhatsApp is the price you pay.
Why marble etches
Marble is calcium carbonate. Acids react with it and dissolve the polished surface, leaving a rough, dull spot. Granite and porcelain do not react this way, which is why a marble top can mark from a squeeze of lemon while the granite kitchen top next to it does not.
Does sealing stop etching?
No. Sealers stop liquids soaking in (stains), but acid still reacts with the surface. The best protection is quick wiping, coasters, and safe cleaning products.
Our process
- Check depth by touch and light angle.
- Hone deep etches with fine diamond pads.
- Polish with marble powder until the gloss returns.
- Blend the edges so no patch shows.
- Booking wait
- Usually 1 to 3 days
- Time on site
- 30 minutes to 2 hours for spot etches; a full floor or top if etching is widespread
Before we arrive
- Clear small items, rugs and fragile decor from the area.
- Let us know about any loose, hollow or cracked tiles you have noticed.
- Arrange contractor registration with your condo management office if needed.
- Keep pets and young children away from the work area.
Aftercare
Use a pH-neutral stone cleaner only. Wipe acidic spills immediately and use coasters and trays on marble tops.
- Yishun-focusedShort travel, more available slots
- Fixed price firstWritten quote before any work
- 90-day warrantyOn workmanship
- Home protectedFurniture covered, low-dust wet process
Etch Repair & Shine – photos from recent jobs
Real photos from our recent marble jobs.
Etch Repair & Shine near you
- Etch Repair & Shine in Yishun Central
- Etch Repair & Shine in Yishun East
- Etch Repair & Shine in Yishun South
- Etch Repair & Shine in Chong Pang (Yishun West)
- Etch Repair & Shine in Khatib
- Etch Repair & Shine in Nee Soon
- Etch Repair & Shine in Springleaf
- Etch Repair & Shine in Lower Seletar
- Etch Repair & Shine in Canberra
- Etch Repair & Shine in Sembawang
Frequently asked questions
Can etch marks on marble be removed?
Yes. Light etches polish out; deeper ones are honed and then polished.
Why did my marble get dull after cleaning?
Many household cleaners, including vinegar, lemon-based and some bathroom cleaners, are acidic and etch marble.
How do I tell an etch from a stain?
An etch is lighter and dull. A stain is darker or coloured. Some marks, like red wine, are both.
Does sealer stop etching?
No. Sealer helps against stains, not acid etching.
Need etch repair & shine in Yishun?
Send a few photos of your marble on WhatsApp and get a clear price, usually the same day.