Yishun · from $1/sq ft*
Marble Polishing in Yishun
Marble is soft stone. Every day of foot traffic, sand and cleaning wears away a little of its shine. Professional marble polishing removes that worn layer and brings back the gloss, colour and veining your marble had on day one, without replacing a single tile.
What's included
- Free site check and test patch on request
- Furniture moved and walls, cabinets and doors protected
- Honing with diamond pads to remove dullness and light scratches
- Polishing with marble powder or crystallisation to a high gloss
- Edges, corners and skirting lines finished by hand
- Slurry cleaned up and floor dried before we leave
- Optional impregnating sealer against stains
Signs you need this
- Floor looks dull or cloudy even after mopping
- Walkways are duller than the edges of the room
- Fine scratches visible in sunlight
- Water and drink rings that will not wipe off
- You are moving in or out and want the floor refreshed
Marble Polishing prices in Yishun
| Service | Price (SGD) |
|---|---|
| Marble floor polishing (grind, hone, polish) | from $1/sq ft* |
| Living / dining room (~250 sq ft) | from $350* |
| Whole condo unit (~1,000 sq ft) | from $1,000* |
| Sealing / resealing only | from $0.60/sq ft* |
| Minimum job charge | $350 ($250 sealing only) |
*Indicative starting rates. Minimum job charge $350 ($250 for sealing only). Final price depends on the marble type, its condition, how much grinding it needs, the area and access. Spot repairs, vanity tops, bathroom walls and regrouting are quoted from photos. No transport charge within Yishun, Canberra and Sembawang. The price we confirm on WhatsApp is the price you pay.
What marble polishing actually does
Marble is mostly calcite, a mineral that is much softer than granite or porcelain. Shoes, sand and chair legs leave thousands of micro-scratches, and these scatter light so the floor looks dull. Polishing is not a coating: it removes the damaged surface in fine stages with diamond abrasives, then polishes the fresh stone so it reflects light again.
Polishing vs grinding vs crystallisation
Light dullness only needs honing and polishing. Uneven tiles (lippage), deep scratches and many etch marks need grinding first, which flattens the floor before polishing. Crystallisation is a chemical polish that gives a quick, hard gloss and is often used for a shine refresh. We explain which your floor needs during the site check, not after.
Our process
- Inspect and test. We check the marble type, scratches, etching, stains and hollow tiles, and do a small test patch if needed.
- Protect. Furniture is moved, and cabinets, doors, skirting and glass are taped and covered with plastic.
- Hone. Diamond pads remove dullness, scratches and etch marks in stages from coarse to fine.
- Polish. Marble polishing powder or crystallisation brings up the gloss.
- Detail. Corners and edges are finished by hand where the machine cannot reach.
- Clean and seal. We clean the slurry, dry the floor and apply sealer if you chose it.
- Booking wait
- Usually 3 to 7 days after you confirm the quote
- Time on site
- 1 day for most 3- to 4-room flats; 2 to 3 days for large condos, landed homes or deep grinding
Before we arrive
- Clear small items, rugs and fragile decor from the area.
- Let us know about any loose, hollow or cracked tiles you have noticed.
- Arrange contractor registration with your condo management office if needed.
- Keep pets and young children away from the work area.
Aftercare
Sweep or dust-mop daily so sand does not scratch the new finish. Mop with a pH-neutral stone cleaner, never vinegar, bleach or lemon-based products. Most homes need a shine refresh every 1 to 2 years and full polishing every 3 to 5 years.
- Yishun-focusedShort travel, more available slots
- Fixed price firstWritten quote before any work
- 90-day warrantyOn workmanship
- Home protectedFurniture covered, low-dust wet process
Marble Polishing – photos from recent jobs
Real photos from our recent marble jobs.
Marble Polishing near you
- Marble Polishing in Yishun Central
- Marble Polishing in Yishun East
- Marble Polishing in Yishun South
- Marble Polishing in Chong Pang (Yishun West)
- Marble Polishing in Khatib
- Marble Polishing in Nee Soon
- Marble Polishing in Springleaf
- Marble Polishing in Lower Seletar
- Marble Polishing in Canberra
- Marble Polishing in Sembawang
Frequently asked questions
How much does marble polishing cost in Yishun?
Marble floor polishing starts from $1/sq ft. A living or dining room of about 250 sq ft is from $350, and a whole condo unit of about 1,000 sq ft from $1,000. Minimum job charge $350 ($250 for sealing only). We confirm the price on WhatsApp before we start.
How long does marble polishing take?
Most 3- to 4-room flats are done in 1 day. Large condo units and landed homes take 2 to 3 days.
Is marble polishing dusty?
We use wet polishing, which keeps dust very low. There is slurry, which we contain and clean up, and we cover furniture, cabinets and doors before starting.
Can I walk on the floor after polishing?
Yes, you can walk on it the same day in socks or clean slippers. If sealer is applied, wait a few hours before mopping and 24 hours before putting rugs back.
How often should marble be polished?
Usually every 3 to 5 years, with a lighter shine refresh every 1 to 2 years in busy areas.
Need marble polishing in Yishun?
Send a few photos of your marble on WhatsApp and get a clear price, usually the same day.