Yishun · from $1/sq ft*
Marble Floor Polishing in Yishun
Marble floors take the most wear in any home. Living rooms, corridors and entrances lose their gloss first, tiles can sit unevenly, and older HDB crazy-paving marble often looks tired after decades of mopping. Our floor polishing service restores the whole floor to an even, reflective finish.
What's included
- Whole-floor inspection, including hollow and cracked tiles
- Full furniture and fittings protection
- Grinding to flatten uneven tiles and remove deep scratches (when needed)
- Honing in stages from coarse to fine diamond pads
- Polishing to a matt, satin or high-gloss finish of your choice
- Hand finishing along skirting, door frames and kitchen cabinets
- Optional sealer
Signs you need this
- Visible walkways and traffic patterns
- Edges of tiles you can feel with your feet (lippage)
- Old crazy-paving marble that looks grey or yellow
- Scratches from furniture or pets
- Shine that mopping no longer brings back
Marble Floor Polishing prices in Yishun
| Service | Price (SGD) |
|---|---|
| Marble floor polishing (grind, hone, polish) | from $1/sq ft* |
| Living / dining room (~250 sq ft) | from $350* |
| Whole condo unit (~1,000 sq ft) | from $1,000* |
| Sealing / resealing only | from $0.60/sq ft* |
| Minimum job charge | $350 ($250 sealing only) |
*Indicative starting rates. Minimum job charge $350 ($250 for sealing only). Final price depends on the marble type, its condition, how much grinding it needs, the area and access. Spot repairs, vanity tops, bathroom walls and regrouting are quoted from photos. No transport charge within Yishun, Canberra and Sembawang. The price we confirm on WhatsApp is the price you pay.
Which finish should you choose?
High gloss looks luxurious and suits living rooms and condo units. Satin (semi-gloss) hides scratches better and suits busy families with kids or pets. Matt (honed) is the most slip-resistant and suits wet areas. We can mix finishes, for example gloss in the living room and honed in the kitchen.
Older HDB crazy-paving marble
Many older Yishun flats still have the original crazy-paving marble: irregular pieces of white, pink and grey marble set in cement. It responds very well to grinding and polishing, and often looks better than new afterwards. See our guide to crazy-paving marble for what to expect.
Our process
- Survey the floor and mark hollow, cracked or chipped tiles for repair first.
- Protect everything that stays in the room.
- Grind (only when needed) to flatten lippage and remove deep scratches.
- Hone through progressively finer diamond grits.
- Polish to the finish you chose.
- Finish edges by hand, clean and seal.
- Booking wait
- Usually 3 to 7 days after you confirm the quote
- Time on site
- 1 day for a typical HDB living room and corridor; 2 to 3 days for a whole condo unit or landed home, especially with grinding
Before we arrive
- Clear small items, rugs and fragile decor from the area.
- Let us know about any loose, hollow or cracked tiles you have noticed.
- Arrange contractor registration with your condo management office if needed.
- Keep pets and young children away from the work area.
Aftercare
Put felt pads under chairs and tables, use doormats at every entrance, and dust-mop daily. Avoid acidic or bleach cleaners. Plan a shine refresh in 1 to 2 years.
- Yishun-focusedShort travel, more available slots
- Fixed price firstWritten quote before any work
- 90-day warrantyOn workmanship
- Home protectedFurniture covered, low-dust wet process
Marble Floor Polishing – photos from recent jobs
Real photos from our recent marble jobs.
Marble Floor Polishing near you
- Marble Floor Polishing in Yishun Central
- Marble Floor Polishing in Yishun East
- Marble Floor Polishing in Yishun South
- Marble Floor Polishing in Chong Pang (Yishun West)
- Marble Floor Polishing in Khatib
- Marble Floor Polishing in Nee Soon
- Marble Floor Polishing in Springleaf
- Marble Floor Polishing in Lower Seletar
- Marble Floor Polishing in Canberra
- Marble Floor Polishing in Sembawang
Frequently asked questions
Do you polish crazy-paving marble in HDB flats?
Yes. It is one of the most common floors we restore in Yishun. It usually needs grinding first because the pieces are uneven.
Can you remove uneven tile edges (lippage)?
Yes. Grinding flattens raised tile edges so the floor feels smooth and reflects evenly.
Do I need to move out?
No. Most families stay in. We work room by room and keep one area usable when possible.
How much is marble floor polishing for a 4-room flat?
It depends on the marble area and condition. Polishing starts from $1/sq ft, a living or dining room from $350, and about 1,000 sq ft from $1,000. Send us photos or your floor plan for a fixed price.
Will polishing make my floor slippery?
A high-gloss floor is as slippery as a new marble floor when wet. If slip resistance matters, ask for a satin or honed finish.
Need marble floor polishing in Yishun?
Send a few photos of your marble on WhatsApp and get a clear price, usually the same day.